Dilum Fernando

2024

Experimental investigation on the racking resistance of cold-formed steel wall panels sheathed with fibre-cement boards

Ringas, N., Fernando, D., Lawson, R. M. & Huang, Y., 11 Dec 2024, (E-pub ahead of print). 4 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

An investigation into the buckling behaviour of hybrid fibre reinforced polymer-timber thin-walled C-section columns

Wen, Y., Fernando, D., Gilbert, B. P., Bailleres, H., Hu, R., Bisby, L. & Roy, D., Oct 2024, In: Advances in Structural Engineering. 27, 14, p. 2409-2428

Research output: Contribution to journal › Article › peer-review

Open Access

Hybrid Composite C-sections from Waste and Recycled Materials  

Ray, D., Stankovic Davidson, D., Bulstrode, S., Davidson, J. & Fernando, D., Sept 2024, In: Sustainable Materials and Technologies. 41, e01102.

Research output: Contribution to journal › Article › peer-review

Open Access

On micropolar elastic foundations

Athanasiadis Fotopoulos, A., Budzik, M., Fernando, D. & Dias, M., 1 May 2024, In: European Journal of Mechanics - A/Solids. 105, 105277.

Research output: Contribution to journal › Article › peer-review

Open Access

A unified approach for the prediction of the effective properties of laminated composite cellular core

Sriharan, J., Dias, M., Fernando, D. & Adhikari, S., 15 Jan 2024, In: Engineering Structures. 299, 117106.

Research output: Contribution to journal › Article › peer-review

Open Access

INFLUENCE OF CONNECTION DETAILING IN COLD-FORMED STEEL FRAMES SHEATHED WITH FIBRE-CEMENT BOARDS

Ringas, N., Huang, Y. & Fernando, D., 2024, ICASS 2023 Proceedings . International Conference on Advances in Steel Structures, 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access

File

2023

DESIGN, FABRICATION, AND TESTING OF A LIGHT WEIGHT HYBRID CONCRETE FIBRE REINFORCED POLYMER BRIDGE GIRDER

Rathnayaka Mudiyanselage, D., Fernando, D., Lopez Dubon, S., Dias, M. & Cuthill, F., 21 Jun 2023, 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023). Zenodo, 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access

Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams

Fernando, S., Vandi, L. J., Heitzmann, M. & Fernando, D., 20 Jun 2023, In: Construction and Building Materials. 383, 131332.

Research output: Contribution to journal › Article › peer-review

Open Access

File

The bond-behaviour of CFRP-to-concrete bonded joints under fatigue loading: A damage accumulation model

Zhou, H., Zhang, S. S., Fernando, D. & Huang, T., 19 May 2023, In: Engineering Fracture Mechanics. 284, p. 109272 109272.

Research output: Contribution to journal › Article › peer-review

Open Access

File

2022

Experimental techniques in structural Testing: Common Mistakes, how to avoid them and other advice

Gilbert, B. P., Fernando, D. & Pham, C. H., Jul 2022, In: Structures. 41, p. 1687-1699 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Behaviour of hybrid glass fibre-reinforced polymer and timber composite laminates under shear loading: Importance of fibre rotation

Miao, C., Fernando, D., Zhou, H., Wilson, P. & Heitzmann, M., 1 May 2022, In: Composite Structures. 287, 115304.

Research output: Contribution to journal › Article › peer-review

The Retardation Process of Crack Propagation in Unconfined High-Strength Concrete Columns Due to the Introduction of Silica Fume

Roslee, A. A., Ho, J. C. M. & Fernando, D., 15 Feb 2022, Design in Maritime Engineering : Contributions from the ICMAT 2021. Springer, p. 327-337 11 p. (Advanced Structured Materials; vol. 167).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of temperature variation on the plate-end debonding of FRP-strengthened beams: A theoretical study

Guo, D., Gao, W. Y., Fernando, D. & Dai, J. G., Jan 2022, In: Advances in Structural Engineering. 25, 2, p. 290-305 16 p.

Research output: Contribution to journal › Article › peer-review

2021

Structural Behaviour of Folded Timber Sandwich Structures

Alqaryouti, Y., Fernando, D. & Gattas, J. M., Dec 2021, In: Thin-Walled Structures. 169, 108345.

Research output: Contribution to journal › Article › peer-review

Open Access

File

Local Buckling of FRP Thin-walled Plates, Shells and Hollow Sections with Curved Edges and Arbitrary Lamination

Higginson, K., Fernando, D., Veidt, M., Burnton, P., You, Z. & Heitzmann, M. T., Nov 2021, In: Thin-Walled Structures. 168, 108242.

Research output: Contribution to journal › Article › peer-review

Open Access

File

A nonlinear beam-spring-beam element for modelling the flexural behaviour of a timber-concrete sandwich panel with a cellular core

Ou, Y., Fernando, N. D., Sriharan, J., Gattas, J. M. & Zhang, S., 1 Oct 2021, In: Engineering Structures. 244, 112785.

Research output: Contribution to journal › Article › peer-review

Open Access

File

Mechanical Properties of Hybrid Fibre Reinforced Polymer-Timber Veneer Laminates

Min, L., Fernando, N. D., Heitzmann, M. T. & Miao, C., 27 Sept 2021, In: Construction and Building Materials. 301, 124316.

Research output: Contribution to journal › Article › peer-review

Open Access

File

Residual performance of a prototype hybrid Timber-FRP glulam beam after fire

Zaben, A., Bailleres, H., Vella, R., McGavin, R. L., Fernando, D., Lange, D. & Maluk, C., 9 Aug 2021.

Research output: Contribution to conference › Paper › peer-review

Behavior of cracked steel plates strengthened with adhesively bonded CFRP laminates under fatigue Loading: Experimental and analytical study

Doroudi, Y., Fernando, D., Hosseini, A. & Ghafoori, E., 15 Jun 2021, In: Composite Structures. 266, p. 113816 1 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Experimental study on the behaviour of hybrid fibre reinforced polymer–timber thin-walled Cee section columns

Min, L., Fernando, D. & Gilbert, B. P., Jun 2021, In: Thin-Walled Structures. 163, 107723.

Research output: Contribution to journal › Article › peer-review

Development of strength and elastic modulus of concrete sealed in steel tube under sustained load at early age

Jiao, Y., Han, B., Xie, H., Zhu, L., Fernando, D. & He, Z., 1 May 2021, In: Advances in Structural Engineering. 24, 7, p. 1357-1367 11 p.

Research output: Contribution to journal › Article › peer-review

Distillation of the material point method cell crossing error leading to a novel quadrature-based C0 remedy

Wilson, P., Wüchner, R. & Fernando, D., 30 Mar 2021, In: International Journal for Numerical Methods in Engineering. 122, 6, p. 1513-1537 25 p.

Research output: Contribution to journal › Article › peer-review

Manufacture and structural performance of modular hybrid FRP-timber thin-walled columns

Cui, W., Fernando, D., Heitzmann, M. & Gattas, J. M., 15 Mar 2021, In: Composite Structures. 260, 113506.

Research output: Contribution to journal › Article › peer-review

The bond behaviour of CFRP-to-concrete bonded joints under fatigue cyclic loading: An experimental study

Zhou, H., Fernando, D., Thuan Nguyen, V. & Dai, J. G., 1 Mar 2021, In: Construction and Building Materials. 273, 121674.

Research output: Contribution to journal › Article › peer-review

2020

Bond Behavior of CFRP-to-Steel Bonded Joints at Mild Temperatures: Experimental Study

Zhou, H., Fernando, D., Torero, J. L., Torres, J. P., Maluk, C. & Emberley, R., 31 Dec 2020, In: Journal of Composites for Construction. 24, 6, 15 p., 04020070.

Research output: Contribution to journal › Article › peer-review

Numerical modelling of the in-plane behaviour of concrete-filled circular steel tubular arches

Han, X., Fernando, D. & Han, B., 20 Dec 2020, In: Construction and Building Materials. 264, 120693.

Research output: Contribution to journal › Article › peer-review

Hybrid FRP-timber thin-walled Cee section columns under axial compression: Numerical modelling

Min, L., Fernando, D., Gilbert, B. P. & You, Z., Dec 2020, In: Thin-Walled Structures. 157, 107029.

Research output: Contribution to journal › Article › peer-review

Fatigue behavior of FRP-to-steel bonded interface: An experimental study with a damage plasticity model

Doroudi, Y., Fernando, D., Zhou, H., Nguyen, V. T. & Ghafoori, E., Oct 2020, In: International Journal of Fatigue. 139, 105785.

Research output: Contribution to journal › Article › peer-review

Full-range stress-strain model for stainless steel alloys

Fernando, D., Teng, J. G., Quach, W. M. & De Waal, L., Oct 2020, In: Journal of Constructional Steel Research. 173, 106266.

Research output: Contribution to journal › Article › peer-review

Load bearing sandwich timber walls with plywood faces and bamboo core

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P. & Fernando, D., Oct 2020, In: Structures. 27, p. 2437-2450 14 p.

Research output: Contribution to journal › Article › peer-review

A Markovian-based methodology for the life-cycle cost analysis of bridge maintenance interventions under changing deterioration rates

D, F., S, W. & B, W., 6 May 2020, (E-pub ahead of print) In: Journal of Civil Engineering Inter Disciplinaries. 1, 1, p. 1-12 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Experimental investigation of a timber-concrete floor panel system with a hybrid glass fibre reinforced polymer-timber corrugated core

Ou, Y., Gattas, J. M., Fernando, D. & Torero, J. L., 15 Jan 2020, In: Engineering Structures. 203, p. 109832 15 p.

Research output: Contribution to journal › Article › peer-review

2019

Experimental investigation of a novel concrete-timber floor panel system with digitally fabricated FRP-timber hollow core component

Ou, Y., Fernando, D. & Gattas, J. M., 10 Dec 2019, In: Construction and Building Materials. 227, 1 p., 116667.

Research output: Contribution to journal › Article › peer-review

Finite-element modelling of FRP-to-concrete bonded joints subjected to the quasi-static monotonic cyclic loading using dynamic explicit approach

Etemadikhosroshahi, E., Zhou, H. & Fernando, D., 1 Dec 2019, APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Smith, S. T., Yu, T., Fernando, D. & Wang, Z. (eds.). APFIS Conference Series, (APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fire safe prototype Timber-FRP hybrid glulam beam - Exploratory studies

Solis, B. Z., Zaben, A., Lange, D., Fernando, D. & Maluk, C., 1 Dec 2019, APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Smith, S. T., Yu, T., Fernando, D. & Wang, Z. (eds.). APFIS Conference Series, (APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Preface: APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures

Smith, S. T., Yu, T., Fernando, D. & Wang, Z., 1 Dec 2019, In: APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. p. III-IV

Research output: Contribution to journal › Editorial › peer-review

Structural Behavior of Digitally Fabricated Thin-Walled Timber Columns

Alqaryouti, Y., Fernando, D. & Gattas, J., 1 Oct 2019, In: International Journal of Structural Stability and Dynamics. 19, 10, 1950126.

Research output: Contribution to journal › Article › peer-review

GFRP-to-timber bonded joints: Adhesive selection

Miao, C., Fernando, D., Heitzmann, M. T. & Bailleres, H., Oct 2019, In: International journal of adhesion and adhesives. 94, p. 29-39 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Optimization Framework for the Design of Advanced Composite Structures

Higginson, K. M. & Fernando, D., 4 Sept 2019, Lecture Notes in Civil Engineering. Springer, Vol. 37. p. 159-168 10 p. (Lecture Notes in Civil Engineering; vol. 37).

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Experimental Study on CFRP-to-Steel Bonded Interfaces under Quasi-Static Cyclic Loading

Doroudi, Y., Fernando, D., Nguyen, V. T. & Torres, J. P., 1 Aug 2019, In: Journal of Composites for Construction. 23, 4, 04019023.

Research output: Contribution to journal › Article › peer-review

The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures

Zhou, H., Fernando, N. D., Torres, J., Law, A. & Emberley, R., 15 Mar 2019, In: Engineering Structures. 183, p. 1121-1133

Research output: Contribution to journal › Article › peer-review

Open Access

File

Fire behaviour of a timber composite with GFRP reinforcement compared to unreinforced laminated timber

Schmidt, L. & Fernando, D., 2019, p. 155-160. 6 p.

Research output: Contribution to conference › Paper › peer-review

Theoretical study on the relationship between the ultimate strength of confined concrete and fibre orientation

Kaya, E. & Fernando, D., 2019, p. 99-104. 6 p.

Research output: Contribution to conference › Paper › peer-review

TTT cure diagram for an ambient temperature curing epoxy-amine thermoset

Fernando, S., Meng, X., Vandi, L. J., Torres, J. P. & Fernando, D., 2019.

Research output: Contribution to conference › Paper › peer-review

2018

Hybrid fibre-reinforced polymer--timber thin-walled structural members

Fernando, D., Teng, JG., Gattas, J. & Heitzmann, M., 1 Jul 2018, In: Advances in Structural Engineering. 21, 9, p. 1409-1417 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Structural behaviour of hardwood veneer-based circular hollow sections of different compactness

Gilbert, B. P., Underhill, I. D., Fernando, D., Bailleres, H. & Miller, D., 10 May 2018, In: Construction and Building Materials. 170, p. 557-569 13 p.

Research output: Contribution to journal › Article › peer-review

Vibration of laminated-beams based on reference-plane formulation: Effect of end supports at different heights of the beam

Fernando, D., Wang, C. M. & Roy Chowdhury, A. N., 15 Mar 2018, In: Engineering Structures. 159, p. 245-251 7 p.

Research output: Contribution to journal › Article › peer-review

Folded hybrid FRP-timber sections: concept, geometric design and experimental behaviour

Gattas, J. M., O'Dwyer, M. L., Heitzmann, M. T., Fernando, D. & Teng, J. G., Jan 2018, In: Thin-Walled Structures. 122, p. 182-192 11 p.

Research output: Contribution to journal › Article › peer-review

Design and construction of a hybrid double-skin tubular arch bridge

De Waal, L., Jiang, S., Torres, J., Chen, G. M., Teng, J. G., Rodman, P., Burnton, P. & Fernando, D., 2018, 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2018. Ferrier, E., Benzarti, K. & Caron, J-F. (eds.). International Institute for FRP in Construction (IIFC), p. 878-887 10 p. (9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2018; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Experimental study of CFRP-to-concrete bonded joints under fatigue loading

Zhou, H., Nguyen, V. T. & Fernando, D., 2018, 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2018. Ferrier, E., Benzarti, K. & Caron, J-F. (eds.). International Institute for FRP in Construction (IIFC), p. 396-403 8 p. (9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2018; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Dilum Fernando

Research output

Search results