Research output per year
Research output per year
- 38 results
Search results
-
2024
A comparative study of network sensor and laser tracker in establishing digital twin for robotic manufacturing
Li, Z., Giorgio-Serchi, F., Southon, N., Brown, A. & Yu, N., 10 Jun 2024, (E-pub ahead of print). 5 p.Research output: Contribution to conference › Paper › peer-review
Open AccessFile -
2022
Foreword to the Special Issue on Nanomanufacturing and Atomic & Close-to-Atomic Scale Manufacturing (ACSM)
Yu, N., Reid, S., Cheung, R. & Koutsos, V., 21 Sept 2022, (E-pub ahead of print) In: Nanomanufacturing and Metrology. 5, 3, p. 189-190 2 p.Research output: Contribution to journal › Editorial
Open Access -
Automation development using a digital approach in prototype pipework
Pecur, T., Yu, N., Sherlock, A. & Mill, F., 3 Jun 2022, (E-pub ahead of print) Proceedings of euspen 2022. p. 1-2 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Effect of optimum process parameters on material removal in rotational-magnetorheological miniature gear profile polishing (R-MRMGPP) process
Kumar, M., Das, M. & Yu, N., May 2022, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 44, 5, 205.Research output: Contribution to journal › Article › peer-review
Open Access -
Wear evolution of microstructured diamond grains in WC/Co cemented carbide single grain scratching
Zhang, Z., Zhang, Q., Wang, W., Yu, N., Ding, W. & Xu, J., 15 Jan 2022, In: Wear. 488-489, 204142.Research output: Contribution to journal › Article › peer-review
-
2021
Edge roll-off suppression method in double-sided lapping with fixed abrasives
Pan, B., Kang, R., Guo, X., Yu, N. & Guo, J., 22 Dec 2021, In: Applied optics. 61, 1, p. 279-286 8 p.Research output: Contribution to journal › Article › peer-review
-
Characterisation of a Cold Atmospheric Pressure Plasma Torch for Medical Applications: Demonstration of Device Safety
Bennett, A., Urayama, T., Papangelis, K., Yuen, P. & Yu, N., 14 Dec 2021, (E-pub ahead of print) In: Applied Sciences. 11, 24, 11864.Research output: Contribution to journal › Article › peer-review
Open Access -
Polymer metallization via cold spray additive manufacturing: A review of process control, coating qualities, and prospective applications
Melentiev, R., Yu, N. & Lubineau, G., Dec 2021, In: Additive Manufacturing. 48, Part B, 102459.Research output: Contribution to journal › Review article › peer-review
Open Access -
Power Dissipation of an Inductively Coupled Plasma Torch under E Mode Dominated Regime
Yu, N., Jourdain, R., Gourma, M., Xu, F., Bennett, A. & Fang, F., 18 Jul 2021, (E-pub ahead of print) In: Micromachines. 12, 7, 834.Research output: Contribution to journal › Article › peer-review
Open Access -
Theoretical and experimental investigation of chemical mechanical polishing of W-Ni-Fe alloy
Guo, J., Shi, X., Song, C., Niu, L., Cui, H., Guo, X., Tong, Z., Yu, N., Jin, Z. & Kang, R., Jun 2021, In: International Journal of Extreme Manufacturing. 3, 2, 025103.Research output: Contribution to journal › Article › peer-review
Open Access -
Investigation of a plasma delivery system for optical figuring process
YU, N., JOURDAIN, R., CASTELLI, M., BENNETT, A., GUO, J., MA, C. & FANG, F., Apr 2021, In: Chinese Journal of Aeronautics. 34, 4, p. 518-525 8 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Characterisation of a microwave induced plasma torch for glass surface modification
Bennett, A., Yu, N., Castelli, M., Chen, G., Balleri, A., Urayama, T. & Fang, F., Mar 2021, In: Frontiers of Mechanical Engineering. 16, p. 122–132Research output: Contribution to journal › Article › peer-review
-
Characterisation of an air plasma torch for in-situ surface processing
Gobey, K., Bennett, A., Yu, N., Castelli, M., Sansom, C., King, P. & Urayama, T., 2021, Laser Metrology and Machine Performance XIV - 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2021. Blunt, L. & Archenti, A. (eds.). euspen, p. 103-110 8 p. (Laser Metrology and Machine Performance XIV - 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2021).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
2020
Design of a motorised plasma delivery system for ultra-precision large optical fabrication
Zhou, H., Bennett, A., Castelli, M., Jourdain, R., Guo, J. & Yu, N., Dec 2020, In: International Journal of Extreme Manufacturing. 2, 4, 045301.Research output: Contribution to journal › Article › peer-review
Open Access -
A new method for edge collapse prevention in fixed-abrasive lapping
Guo, J., Pan, B., Wang, B., Yu, N., Guo, X. & Kang, R., 12 Jun 2020, Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 101-102 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
Design and optimization of plasma jet nozzles based on computational fluid dynamics
Yu, N., Yang, Y., Jourdain, R., Gourma, M., Bennett, A. & Fang, F., 11 Jun 2020, In: International Journal of Advanced Manufacturing Technology. 108, 7-8, p. 2559-2568 10 p.Research output: Contribution to journal › Article › peer-review
-
Mechanically enabled two-axis ultrasonic-assisted system for ultra-precision machining
Yu, N., Liu, J., Durand, H. M. & Fang, F., 20 May 2020, In: Micromachines. 11, 5, 522.Research output: Contribution to journal › Article › peer-review
Open Access -
A New Method for Edge Collapse Prevention in Bound-Abrasive Lapping
Yu, N., 2020, euspen’s 20th international conference, Geneva.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Development of an Ultrasonic Vibration Cutting system for Stavax mould machining
Yu, N., 2020, euspen’s 20th international conference, Geneva.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Etching characteristics of crystal quartz by surface wave microwave induced plasma
Adam, B., Nan, Y., Marco, C., Guoda, C. & Fengzhou, F., 2020, AOPC 2020: Optics Ultra Precision Manufacturing and Testing. Kong, L., Zhang, D. & Luo, X. (eds.). SPIE, 1156807. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11568).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2019
Air bearing: academic insights and trend analysis
Chen, G., Ju, B., Fang, H., Chen, Y., Yu, N. & Wan, Y., 6 Dec 2019, In: International Journal of Advanced Manufacturing Technology. 106, 3-4, p. 1191-1202 12 p.Research output: Contribution to journal › Article › peer-review
-
Design of a dedicated Ultrasonic Vibration Cutting system for Intraocular Lenses (IOLs) manufacturing
Yu, N., 2019, CIRP sponsored International Manufacturing Conference of China, Shenyang.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Hardware and Software Development for Ultrasonic Vibration Cutting (UVC) System
Yu, N., 2019, CIRP sponsored International Manufacturing Conference of China, Shenyang.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2018
State of the art of intraocular lens manufacturing
Yu, N., Fang, F., Wu, B., Zeng, L. & Cheng, Y., 1 Sept 2018, In: International Journal of Advanced Manufacturing Technology. 98, 5-8, p. 1103-1130 28 p.Research output: Contribution to journal › Article › peer-review
-
Dynamic Accuracy Design Method of Ultra-precision Machine Tool
Chen, G. D., Sun, Y. Z., Zhang, F. H., Lu, L. H., Chen, W. Q. & Yu, N., 28 Feb 2018, (E-pub ahead of print) In: Chinese Journal of Mechanical Engineering (English Edition). 31, 1, 8.Research output: Contribution to journal › Article › peer-review
Open Access -
2017
Power dissipation investigation of bespoke De-Laval nozzles for rapid Plasma Figuring process
Yu, N., 2017, euspen’s 17th international conference, Hannover.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
RF network parameter investigation of the plasma delivery system used for Plasma Figuring
Yu, N., 2017, euspen’s 17th international conference, Hannover.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2016
Aerostatic thrust bearing performances analysis considering the fluid-structure coupling effect
Lu, L., Chen, W., Yu, N., Wang, Z. & Chen, G., 1 Dec 2016, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 230, 12, p. 1588-1596Research output: Contribution to journal › Article › peer-review
-
CFD Analysis of an enhanced nozzle designed for plasma figuring of large optical surfaces
Yu, N., Jourdain, R., Gourma, M. & Shore, P., 3 Jun 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). euspen, 2 p. (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
Analysis of De-Laval nozzle designs employed for plasma figuring of surfaces
Yu, N., Jourdain, R., Gourma, M. & Shore, P., 27 Feb 2016, In: International Journal of Advanced Manufacturing Technology. 87, p. 735–745Research output: Contribution to journal › Article › peer-review
Open Access -
Energy Balance Investigation of an Inductively Coupled Plasma Torch for Plasma Figuring
Yu, N., 2016, euspen’s Special Interest Group Meeting: Thermal Issues, Prague.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Enhanced nozzle design of highly collimated plasma jets for surface correction
Yu, N., 2016, euspen’s 16th international conference, Nottingham.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Estimation of the power absorbed by the surface of optical components processed by an inductively coupled plasma torch
Jourdain, R., Castelli, M., Yu, N., Gourma, M. & Shore, P., 2016, In: Applied Thermal Engineering.Research output: Contribution to journal › Article › peer-review
-
2015
Investigation of power dissipation in a collimated energy beam
Yu, N., 2015, 6th international conference of ASPEN, Harbin.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2014
Simulation study of material deformation in monocrystal silicon nano-machining
Yu, N., Liang, Y., Chen, J. & Guo, Y., Aug 2014, In: Key Engineering Materials. 621, p. 32-37 6 p.Research output: Contribution to journal › Article › peer-review
-
An expert system for hydro/aero-static spindle design used in ultra precision machine tool
Liang, Y., Chen, W., Sun, Y., Yu, N., Zhang, P. & Liu, H., Apr 2014, In: Robotics and Computer-Integrated Manufacturing. 30, 2, p. 107-113 7 p.Research output: Contribution to journal › Article › peer-review
-
Analysis of nozzle design used for the creation of advanced energy beam
Yu, N., Jourdain, R., Gourma, M. & Shore, P., 2014. 6 p.Research output: Contribution to conference › Paper
Open Access -
2013
Study of dislocation nucleation mechanism in nanoindentation process
Liang, Y. C., Wang, Q. L., Yu, N., Chen, J. X., Zha, F. S. & Sun, Y. Z., 1 May 2013, In: Nanoscience and Nanotechnology Letters. 5, 5, p. 536-541 6 p.Research output: Contribution to journal › Article › peer-review