Skip to main navigation Skip to search Skip to main content

All-timber connections: Developing a new CLT edge connection for tall timber structures

Research output: Contribution to conference › Paper

Abstract

Inspired by traditional woodworking joints, three types of all-timber wall panel edge connections for CLT structures were designed, manufactured and tested. The three designs had a form of a finger joint and included the following arrangements: simple rectangular, zigzag and inverse zigzag. Samples of dimensions of 175 mm wide by 120 mm high by 19 mm deep were tested to determine the ultimate load resistance, failure mode and joint stiffness. An analytical model was developed to design samples undergoing ductile bearing failure; however, it was found that all specimens failed in an undesirable brittle shear failure mode. Following data analysis, a new connection design was proposed for future study, combining advantages of all three tested connection types. By decreasing the interlocking of the connection, it is hoped that the new design would have an adequate stiffness, yet fail in a preferable ductile mode. Further research in this topic is required in order to verify the suitability of the proposed solution in mass timber structures.

Original languageEnglish
Publication statusPublished - 9 Aug 2021
EventWorld Conference on Timber Engineering 2021, WCTE 2021 - Santiago, Chile
Duration: 9 Aug 2021 → 12 Aug 2021

Conference

ConferenceWorld Conference on Timber Engineering 2021, WCTE 2021
Country/TerritoryChile
CitySantiago
Period9/08/21 → 12/08/21

Keywords / Materials (for Non-textual outputs)

  • All-timber
  • CLT
  • Edge connections
  • Mass timber

Fingerprint

Dive into the research topics of 'All-timber connections: Developing a new CLT edge connection for tall timber structures'. Together they form a unique fingerprint.

Cite this