Generation of bidirectional shear horizontal guided waves by size optimization of face-shear piezoelectric transducers

Generating directional guided waves helps to avoid unwanted reflections while providing location information for defects. Bidirectional waves focus wave beams in two opposite directions, which can be applied for generating circumferential zero-order shear horizontal (SH0) waves for large-diameter pipe inspection. In this paper, a novel method for generating bidirectional SH0 waves through size optimization using face-shear (d ₂₄) lead zirconate titanate (PZT) transducer is proposed. A theoretical model is established based on the shear-lag model and the Huygens principle, which describes the generation and propagation of SH0 waves in thin plate by bonded d ₂₄ PZT transducer. The theoretical model is validated by multi-physics finite element (FE) simulation results in terms of SH0 displacement wavefield. Based on the theoretical model, the performance of bidirectional SH0 wave generation is studied. The maximum bidirectional ratio that can be achieved by d ₂₄ PZT within a size range (1–25 mm) under a five-cycle sinusoid tone-burst excitation at a center frequency range (50–300 kHz) is studied. Results show that over 20 dB effect can be achieved at the PZT with a specific aspect ratio. Laboratory experiments are conducted using d ₂₄ PZT transducers at 50–300 kHz to validate the effect of bidirectional wave generation in practical detection scenarios. Experimental results show effects of over 20 dB within a certain frequency range can be achieved when using a PZT with a large aspect ratio, which agree well with the theoretical predictions.