On the Use of a Single Beam Acoustic Current Profiler for Multi-Point Velocity Measurement in a Wave and Current Basin

Marilou Jourdain De Thieulloy, Mairi Dorward, Chris Old, Roman Gabl, Thomas Davey, David Ingram, Brian Sellar

Research output: Contribution to journalArticlepeer-review

Abstract

Harnessing the energy of tidal currents has huge potential as a source of clean renewable energy. To do so in a reliable and cost effective way, it is critical to understand the interaction between tidal turbines, waves, and turbulent currents in the ocean. Scaled testing in a tank test provides a controlled, realistic, and highly reproducible down-scaled open ocean environment, and it is a key step in gaining this understanding. Knowledge of the hydrodynamic conditions during tests is critical and measurements at multiple locations are required to accurately characterise spatially varying flow in test tank facilities. The paper presents a laboratory technique using an acoustic velocimetry instrument, the range over-which measurements are acquired being more akin to open water applications. This enables almost simultaneous multi-point measurements of uni-directional velocity along a horizontal profile. Velocity measurements have been obtained from a horizontally mounted Single Beam Acoustic Doppler (SB-ADP) profiler deployed in the FloWave Ocean Energy Research Facility at the University of Edinburgh. These measurements have been statistically compared with point measurements obtained while using a co-located Acoustic Doppler Velocimeter (ADV). Measurements were made with both instruments under flow velocities varying from 0.6 m/s to 1.2 m/s, showing that flow higher than 1 m/s was more suitable. Using a SB-ADP has shown the advantage of gaining 54 simultaneous measurement points of uni-directional velocity, covering a significant area with a total distance of 10 m of the test-tank, at a measurement frequency of 16 Hz. Of those measurement points, 41 were compared with co-located ADV measurements covering 8 m of the profile for a tank nominal flow velocity of 0.8 m/s, and four distributed locations were chosen to to carry out the study at 0.6 m/s, 1.0 m/s, and 1.2 m/s. The comparison with the ADV measurement showed a 2% relative bias on average.
Original languageEnglish
Article number3881
Number of pages19
JournalSensors
Volume20
Issue number14
DOIs
Publication statusPublished - 12 Jul 2020

Keywords

  • offshore renewable energy
  • tank testing
  • acoustic Dopler profiling
  • tidal current

Fingerprint Dive into the research topics of 'On the Use of a Single Beam Acoustic Current Profiler for Multi-Point Velocity Measurement in a Wave and Current Basin'. Together they form a unique fingerprint.

Cite this