TY - JOUR
T1 - The impact of galaxy colour gradients on cosmic shear measurement
AU - Voigt, L. M.
AU - Bridle, S. L.
AU - Amara, A.
AU - Cropper, M.
AU - Kitching, T. D.
AU - Massey, R.
AU - Rhodes, J.
AU - Schrabback, T.
AU - Kitching, Thomas
PY - 2012/1/1
Y1 - 2012/1/1
N2 - Cosmic shear has been identified as the method with the most potential
to constrain dark energy. To capitalize on this potential, it is
necessary to measure galaxy shapes with great accuracy, which in turn
requires a detailed model for the image blurring by the telescope and
atmosphere, the point spread function (PSF). In general, the PSF varies
with wavelength and therefore the PSF integrated over an observing
filter depends on the spectrum of the object. For a typical galaxy the
spectrum varies across the galaxy image, thus the PSF depends on the
position within the image. We estimate the bias on the shear due to such
colour gradients by modelling galaxies using two co-centred,
co-elliptical Sérsic profiles, each with a different spectrum. We
estimate the effect of ignoring colour gradients and find the shear bias
from a single galaxy can be very large depending on the properties of
the galaxy. We find that halving the filter width reduces the shear bias
by a factor of about 5. We show that, to the first order, tomographic
cosmic shear two point statistics depend on the mean shear bias over the
galaxy population at a given redshift. For a single broad filter, and
averaging over a small galaxy catalogue from Simard et al., we find a
mean shear bias which is subdominant to the predicted statistical errors
for future cosmic shear surveys. However, the true mean shear bias may
exceed the statistical errors, depending on how accurately the catalogue
represents the observed distribution of galaxies in the cosmic shear
survey. We then investigate the bias on the shear for two-filter imaging
and find that the bias is reduced by at least an order of magnitude.
Lastly, we find that it is possible to calibrate galaxies for which
colour gradients were ignored using two-filter imaging of a fair sample
of noisy galaxies, if the galaxy model is known. For a signal-to-noise
ratio of 25 the number of galaxies required in each tomographic redshift
bin is of the order of 104.
AB - Cosmic shear has been identified as the method with the most potential
to constrain dark energy. To capitalize on this potential, it is
necessary to measure galaxy shapes with great accuracy, which in turn
requires a detailed model for the image blurring by the telescope and
atmosphere, the point spread function (PSF). In general, the PSF varies
with wavelength and therefore the PSF integrated over an observing
filter depends on the spectrum of the object. For a typical galaxy the
spectrum varies across the galaxy image, thus the PSF depends on the
position within the image. We estimate the bias on the shear due to such
colour gradients by modelling galaxies using two co-centred,
co-elliptical Sérsic profiles, each with a different spectrum. We
estimate the effect of ignoring colour gradients and find the shear bias
from a single galaxy can be very large depending on the properties of
the galaxy. We find that halving the filter width reduces the shear bias
by a factor of about 5. We show that, to the first order, tomographic
cosmic shear two point statistics depend on the mean shear bias over the
galaxy population at a given redshift. For a single broad filter, and
averaging over a small galaxy catalogue from Simard et al., we find a
mean shear bias which is subdominant to the predicted statistical errors
for future cosmic shear surveys. However, the true mean shear bias may
exceed the statistical errors, depending on how accurately the catalogue
represents the observed distribution of galaxies in the cosmic shear
survey. We then investigate the bias on the shear for two-filter imaging
and find that the bias is reduced by at least an order of magnitude.
Lastly, we find that it is possible to calibrate galaxies for which
colour gradients were ignored using two-filter imaging of a fair sample
of noisy galaxies, if the galaxy model is known. For a signal-to-noise
ratio of 25 the number of galaxies required in each tomographic redshift
bin is of the order of 104.
UR - http://www.scopus.com/inward/record.url?scp=84858450438&partnerID=8YFLogxK
U2 - 10.1111/j.1365-2966.2011.20395.x
DO - 10.1111/j.1365-2966.2011.20395.x
M3 - Article
SN - 1365-2966
SP - 2333
JO - Monthly Notices of the Royal Astronomical Society
JF - Monthly Notices of the Royal Astronomical Society
ER -