Edinburgh Research Explorer

A numerical study of wall pressure and granular flow in a flat-bottomed silo

Research output: Contribution to journalArticle

Related Edinburgh Organisations

Open Access permissions

Open

Documents

Original languageEnglish
Pages (from-to)43-54
Number of pages13
JournalPowder Technology
Volume282
DOIs
Publication statusPublished - 1 Sep 2015

Abstract

This paper presents a numerical study of the granular flow in the discharge of a flat-bottomed model silo. The behaviour of the stored granular material is modelled using the finite element (FE) method based on an Arbitrary Lagrangian-Eulerian (ALE) frame of reference, which has shown advantageous performance over the classical FE methods in simulating the silo filling and discharge process in a series of studies leading up to this investigation. Experimental results have been used to validate the computational model using the ALE technique. The spatial distribution and time history of the pressures acting on the vertical silo walls predicted by the FE model are found to resemble well the test results. A semi-mass flow pattern has been predicted by the numerical model, which is very consistent with the corresponding experimental observation. With the validated numerical model, the flow behaviour specifically under a flat-bottomed geometry of silos is examined. Based on the velocity distribution in the granular material, a critical velocity ratio criterion is proposed and used to identify the flow channel boundary. A further numerical study has shown that the flow behaviour in the flat-bottomed silo is closely related to the shear strength of the material, which is represented by the internal friction angle for the cohesionless sand considered in the present study.

    Research areas

  • Arbitrary Lagrangian-Eulerian formulation (ALE), Finite element modelling, Granular flow, Wall pressure

Download statistics

No data available

ID: 20113782